Review P-Bandai ROBOT魂 Act Zaku ver. A.N.I.M.E.

Introducing ROBOT Spirits Act Zaku ver. A.N.I.M.E.! This is a Premium Bandai limited item. Review

The MS-11 Act Zaku is a Principality of Zeon mass production general-purpose mobile suit. It was featured as a mobile suit variation in MS-X, it later appeared in the anime Mobile Suit Zeta Gundam and the manga Mobile Suit Gundam Side Story: Space, To the End of a Flash and Mobile Suit Gundam: Outer Gundam manga.

Based on the design of the MS-06 Zaku II, the Act Zaku is a normal evolution of the Zaku series. Its development was focused on improving the Zaku series and enhancing overall mobility. The Act Zaku was the testbed for the new “magnet coating” technology developed by the Zeonic Company. This technology reduces the friction caused by joints movement, enabling a faster and more responsive mobile suit. Because of this, the Act Zaku’s joints are driven by field motors, similar to Federation mobile suits, rather than the fluid pulse system typically used by Zeon mobile suits.
The Act Zaku also had a much higher output reactor to wield beam weaponry. The Act Zaku could be issued the standard armaments of the Zaku series, such as the 120mm machine gun and 280mm bazooka. Model number MS-11 was originally given to the MS-14 Gelgoog, but was transferred to this unit due to delays in the development of the Gelgoog. Overall, the Act Zaku has demonstrated performance comparable to the Gelgoog’s.

The action figure:

This time too, the armored surface is substantial and there is a wide range of movements, but even on the movable surface the waist power pipe is made of a soft material and easy to come out, but it was good that it was considered movable.
The price is 7,000 Yen

As usual, it was in a transparent tray and the beam effect and seal were individually wrapped.

customized stickers included.

You can also move the monoeye by removing the top of the head while the characteristic head shape is reproduced.

The antenna is quite thin.

Swingable armor on the shoulder.

The hip joint has drawer movement, and the hip front armor and side armor also move, so the hip’s range of motion is secured.

A set of replacement wrist parts, a beam rifle, a bullpup gun, a beam saber, a large heat hawk, and a cracker are included.

The antenna comes with left and right spares, and the shape of the joint seems to be different on the left and right.

-Wrist parts include left and right weapon holding wrists, right and left weapon holding wrist angles, left and right gun holding wrists, left and right flat hand wrists, and can be mounted on the wrist storage deck.

Beam saber comes with 2 grips, beam blade effect (straight type) x2, beam blade effect (curved) and joint parts for mounting.

The beam saber grip can be mounted on the waist rear armor with joint parts.

Two sets of crackers are attached and can be mounted on the waist power pipe connection part, but it seems that it can not be held by holding the joint parts.

This is a large heat hawk that comes with two mounts, one for mounting and one for heating.

The Heat Hawk can be mounted on either waist side armor.

beam rifle of the same type as Marasai, and comes with a beam effect.

The fore grip can swing, and the magazine can be removed.

bullpup gun with joint parts for mounting. The rear grip is swingable and the stock is slidable for expansion and contraction. By deploying the waist rear armor and using joint parts, it can be mounted at the same time as the beam saber.

You can also equip an optional Gelgoog shield.

Here we go with the photo review

vega0083 blog fc2 com